This article is about updating the FW for your Pro AV Projector.
Optoma Pro AV projectors support Over-The-Air (OTA) FW update method. This means that as long as your projector is on the network and that network has access to internet; then whenever there is a new FW available on the Optoma server; your Optoma product will be able to prompt you on the projected screen to download that new FW next time you power on your device.
If you do not have your projector on the internet but on your local network; and still want to do a FW update manually from your laptop on the same local network, your projector supports FW update via the "Upgrade" tab on the Projector webpage. See below:
Simply click on "Browse" button for the file dialogue box which will allow you to navigate to open the FW file on your laptop; and then click on "Upgrade" button on top right corner of the page. It will proceed with the FW update process and will notify you via prompts when the FW update is completed.
Your device may power cycle itself after the FW update is completed.
Warning: Please do not unplug the power cord on your projector in the middle of a firmware update; or else that may "brick", or "render your projector from functioning" and hence potentially require your projector to needing repairs. Please contact Optoma Technical support in the event this happens to help you with the return for repair process.
Note: Example snapshots below of successful FW update process for reference (note: not all FW updates will have these particular updates but is a general overview only; your specific prompts and FW update progress per your projector model may be slighttly different. Stages of updates may include : MCU update, FPGA update, DDP update for firmware. If a specific file version is already up to date; it may update the only remaining FW version that needs updating. Please simply follow the prompts on your specific projector screen. Thank you.
Disclaimer: If your projector is on; and the projector FW update seems completed. Please turn off projector via your projector remote or via your projector keypad (if applicable). Then power on the projector as normal. Please note that most "DDP" updates happen after the unit is powered on post the initial FW updates. This is part of normal process and you should proceed as normal with the DDP update (only if your system indicates a DDP update is available. Sometimes a DDP update will not be available and you can continue using your projector as normal). If you have any issues with the FW update process or have any questions, please reach out to Optoma Technical support.
note: If you have a non-Pro AV projector from Optoma that either doesn't support OTA FW update or does not have a projector webpage since per its product category; then FW update can still be done via USB FW update method. USB FW updates are only done as a last resort. USB FW updates will delete files on your projector; since its nature is that it restores all settings back to Factory settings. If you stored any files on your projector prior; offload those files to a laptop in interim while you do the USB FW update. Please reach out to Optoma technical support for the specific process for USB FW update per your model as process may differ depending on the projector model family.