When using the projector for the first time, follow the on-screen instructions to pair the remote control via Bluetooth with your projector.
- Wait for the Bluetooth pairing prompt on the screen. Then bring the remote control within 10 cm (0.33 ft) from the projector
- Press and hold the
and
buttons on the remote control simultaneously until the indicator light starts flashing. Then release both buttons.
3. When you see pairing successful message on screen, this indicates the remote control is successfully paired.
Note:
- If pairing is unsuccessful, repeat the above steps until remote control indicator light stops flashing
- Voice search functionality on the remote control is only available after the remote control has been paired to the projector by Bluetooth
- You will need the remote control to navigate the projector menus
- If you need further guidance or have any other questions about the remote, please contact Optoma support 1-888-862-0228